ventilation and air exchange of various ships, as well as other suitable occasions.
Marine oil pump gearbox - has the advantages of compact structure, small volume, light weight, low power consumption, reversibility, smooth operation, and resistance to a certain degree of impact and vibration.
Marine oil pump gearbox - The impeller of the marine fan is made of corrosion-resistant aluminum alloy cast and dynamically balanced, with good anti-corrosion performance and stable and reliable operation.
Marine water pump gearbox - The casing of the marine fan adopts a steel plate welded structure, with anti-corrosion treatment on the surface. The casing has flanges at both ends of the inlet and outlet for bolt connection with the inlet and outlet air ducts.
Marine water pump gearbox - the casing can be made into a single unit or an axial opening structure as needed. The open type casing is a semi casing that can be opened by installing the impeller and motor, making it convenient for on-site maintenance and component replacement.
The marine water pump gearbox fan is made with an electric motor placed inside the casing, and the impeller is directly mounted on the motor shaft.
Gearbox of marine generator set - viewed from one end of the motor, the fan impeller rotates clockwise. In use, it is allowed for the fan impeller to rotate counterclockwise. In this state, the wind speed of the fan is greater than 6% of the rated air volume.
The gearbox fan of the marine generator set can be equipped with: 80V, 415V, 5Hz or A40V, 460V, 480V, 60Hz marine AC motors.
-
